Foxbody LS6 intake question....
09-07-2016, 07:50 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2014
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Foxbody LS6 intake question.... I have done an hour of research and have not come up with anything, so that is my cutoff lol. Does an LS6 intake fit under a stock foxbody hood. Plain and simple answers only. I have a TeamZ cross member. Thanks
09-20-2016, 07:20 AM
#4
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2014
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I figured I would share the measurements in case anyone else had that same question as I did.
I have three intakes here. Edelbrock pro-flo xt, lq4 truck, and an LS6
The edelbrock measures 10"
The truck can be as high as 11.5" but if trimmed could potentially be lower than the edelbrock.
And lastly the question I originally had for this thread. The LS6 intake is 6.25" tall
I have three intakes here. Edelbrock pro-flo xt, lq4 truck, and an LS6
The edelbrock measures 10"
The truck can be as high as 11.5" but if trimmed could potentially be lower than the edelbrock.
And lastly the question I originally had for this thread. The LS6 intake is 6.25" tall
Last edited by quickspool; 09-20-2016 at 07:27 AM. Reason: Link didn't work
