Do angled heater outlets exist?
#3
TECH Addict
iTrader: (2)
Gary's 68 has drilled and tapped the water outlets on his Corvette for that very reason. The only way I have seen or heard of what you need is by doing the same. I'm not aware of a standard water pump that has the ports relocated like you need.
**Look at the time stamps... hahahaha!!! Quick draw McGary!!!
**Look at the time stamps... hahahaha!!! Quick draw McGary!!!
#6
Heater
You can pull the original heater nipples out as they are a press fit and then tap the water pump with a 3/8 & 1/2 NPT tap then you will have a wide variety of angled heater hose nipples to choose from. Street & Performance sells some nifty ones that can be screwed in and can swivel in any direction that you like.
#7
Staging Lane
Join Date: Dec 2005
Location: Portland, Oregon
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
all the big heater hose companies make the heater hoses in the standard dimensions in a big L shape - you get ~3" and then a nice 90 and then 12-48" of tube, trim down the short piece and you get a nice 90 degree rubber fitting without drilling/tapping or the expense of AN/NPT fittings. I used two sizes for the heater hoses that run to my heater box on the firewall for my swap.