waxenate

iTrader: (5)

I'm putting a 2000 LS1 into a 95 Z-28. I bought a harness from a guy who said it was a '99, turns out it was a '98. I have been using info from Flame and Merv to wire the LS1 into the LT1 and it was pretty straight forward but now I'm lost. Several of the wires on the underdash and wheel well connectors are different colors than the harnesses used in their swaps. Can anyone please give me some direction. I would like to try to stay with the harness I have because finding one in the first place was a bitch.

(A little background) This car is a budget minded, father son project with emphasis on FATHER. This is something my dad did with me and I am trying to pass on that experience. The difference is that my dad had done it before.....I'm pretty much a newb. This website has been a tremendous help and I have learned a ton. So ANY help would be greatly appreciated!

Thanks in advance!

Rick Speed

iTrader: (55)

This website gives alot of info you need. I used a 98 harness as well.
http://www.lt1swap.com/ls1_wiring_ha...connectors.htm

waxenate

iTrader: (5)

Thanks...decided to pull it off and go with one from rock auto.