5.3 s10 ...
#24
Teching In
Join Date: Oct 2011
Location: Fayetteville, NC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Cluster Wiring Diagram
Does anybody have the diagram for the gauges on a 2001 s10? I'm swapping the 5.3 into my xtreme that originally came with a 2.2 and need some help with making the gauges work. i understand i have to recalibrate the tach and all. Thanks. I'll post some pics up of my truck. its not too much but i'm trying to do the most with it.
#25
Staging Lane
Thread Starter
Join Date: Jul 2011
Location: Virginia
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Im unsure of where to get a diagram for the guages. I didnt have to do anything to mine. Im using the computer that was for the 5.3 from the donor vehicle and it will run your factory guages just fine.
#27
Teching In
Join Date: Oct 2011
Location: Fayetteville, NC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Well thanks. I'll definately leave him a message. By any chance, do I have to bypass VATS for the swap? I'm using the donor vehicles ecm that came with the motor.
#29
Staging Lane
Thread Starter
Join Date: Jul 2011
Location: Virginia
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
5.3 (rip) s10... Will now be 6.0
I just wanted to do a lil update for you guys. Unfortunately my 5.3 spun a main bearing, so the truck is under the knife right now... Getting a 6.0 . I almost have the 6.0 ready to go in. I went with a bigger cam and a set of Katech rod bolts, everything else will be the same as before. I'm kinda excited to see how this turns out
#37
11 Second Club
iTrader: (88)
Uh oh..lol..
I can see you catching that time. I say that cause with my truck I got 12.18, stock Stall and Gears. That was on 89 gas with my street tune, and running rich..MAF wouldnt dial in, was running Test N Tune and that was the best that nite.
I have since then got it dialed in, and I'm willing to bet if I got it runnin on some 93 and spiced up the timing, it would catch 11.9X. Just a LS1 & Hotcam, Short Headers like yours.
I can see you catching that time. I say that cause with my truck I got 12.18, stock Stall and Gears. That was on 89 gas with my street tune, and running rich..MAF wouldnt dial in, was running Test N Tune and that was the best that nite.
I have since then got it dialed in, and I'm willing to bet if I got it runnin on some 93 and spiced up the timing, it would catch 11.9X. Just a LS1 & Hotcam, Short Headers like yours.