jaddld454

I'm not sure how many of you have dealt with PSI but I bought a full harness for my LS powered Jeep from John over there and it couldn't have gone better. Any issues I've had (all self inflicted BTW) John was right there to help...even on Saturday and Sunday!

I just had such a good experience with PSI that I felt the need to let them and everyone else know it!

Thanks John for everything!

430 hp 70

iTrader: (3)

thanks for the review. i was going to use the gmpp harness but think all the positive reviews have led me to psi instead.

jaddld454

You wont be disappointed. The hardest part of the install was drilling the hole. Lol

snipes

iTrader: (14)

After dealing with them for a couple small parts, I am def using them for my harness.

-TheBandit-

iTrader: (1)

Any up close pictures of your harness? What was it wrapped in? Excess wire loops on sme runs or just the right length? Exposed wire anywhere or is everything in loom? Fuse panel included? Cost?

Moter

iTrader: (20)

^^^^ Yea what he said Love to see pics

jaddld454

The fuse panel is included. There was no exposed wire except for the wires u need to connect to key on, ground etc. Cost was right around $500 and they tested the computer and gas pedal to make sure it all worked.

jaddld454

If i get a chance i'll go click a few pics but unfortunately u wont see much since i hid it pretty good. Someone is gonna need to guide me through posting pics on here. Sorry never tried it. Lol

Squeezer

Good information to hear.

Did you send them the throttle body, pedal and ecm for testing?

V8Rumble

iTrader: (9)

Hmmm. Good to know! I've been pretty dead-set on doing my own harness (largely because I expect that the knowledge will help me when troubleshooting), but it's definitely helpful to know that there are vendors out there doing good-quality work... If for some reason I decide it's too much grief to do my own, I'll keep them in mind...

RenoReno2

iTrader: (2)

I havent installed the harness yet as I'm not at that step yet but I have to agree with previous comments the build quality of the harness is very impressive.

welldonecj7

iTrader: (13)

What type of jeep did you do the ls swap into?

psiconversion

iTrader: (5)

Thanks for the compliments.

Here are some pics of our harnesses.

84lsvette

iTrader: (3)

Good info to know if I can't get this camaro harness sorted out!!

boostnut

iTrader: (7)

Jon, your pics aren't showing up. Noticed that in one of your other posts as well.

psiconversion

iTrader: (5)

Thanks Boostnut. Not sure why that is, having issues with the forum uploading them for some reason. Saw this on some other postings, has anyone else had this issue?

Jon
PSI

2 SSlow

iTrader: (26)

Thanks for the review....I was considering modifying my own, but figured for a couple hundred more, I could avoid a potential serious headache LOL. I will probably be contacting PSI when the time comes.


I noticed this as well.....on my cell phone and work computer.

67 church

I will echo all of the great reviews for PSI

I used their harness on my Chuck Wagon build and it was very well put together. It was nice to have been able to drill a hole, plug and play.

STEEPSS

iTrader: (30)

Upload them to photobucket or imageshack and then insert the IMG code in the post. Works every time

DoWantLS1

iTrader: (1)

Glad to hear, I talked to him a couple times through email because I plan to get their harness for my ls1 notch. Was also surprised on his reply within an hour on a Sunday.