borrone821

iTrader: (3)

Hey guys,
On my 6.0L LY6, the power steering pump has the pressure port (16mm for anyone who's wondering) and two return lines. One was designed for the hydroboost which I'm not using. The other will be going back to the rack.

Many folks on here have said to just cap the line for the hydroboost. The question is: how do you "cap it?" Do I need to braze/weld it shut? Are there rubber "caps" for these types of problems? Just trying to figure out how to close off that extra return line.

Thanks
jim

garys 68

iTrader: (1)

Rubber vacuum cap on mine with a hose clamp. Availabe at any parts store.