68-72 Chevelle FL Headers compatible in G Body???
02-27-2012, 01:27 PM
#1
Teching In
Thread Starter
Join Date: Oct 2010
Location: Dayton, Ohio
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
68-72 Chevelle FL Headers compatible in G Body??? Ive been looking around and reading countless threads on LS G body swaps.
Ive noticed that there are not very many G Body header options. Ofcourse the BRP's are about the best thing Ive seen offered for G Body's IMO.
But I am not a fan of coated headers, they dont look like they cout $6-700 for very long. I would rather spend a $2-300 more for stainless. Thats were Im running into a problem, I havent seen any FL Stainless headers for a G Body?
My 86 Monte SS originaly had a SBC 350 with 68-72 Chevelle Hooker Comp FL headers and they fit great! Ive been looking at pictures of chevelle headers and G Body BRP's and F Body headers and the Chevelle Swap and BRP'S look very similar.
So my questions is has anyone out there tried/or put Chevelle swap headers in a G Body before.
Thanks any info would be greatly appreciated!
Ive noticed that there are not very many G Body header options. Ofcourse the BRP's are about the best thing Ive seen offered for G Body's IMO.
But I am not a fan of coated headers, they dont look like they cout $6-700 for very long. I would rather spend a $2-300 more for stainless. Thats were Im running into a problem, I havent seen any FL Stainless headers for a G Body?
My 86 Monte SS originaly had a SBC 350 with 68-72 Chevelle Hooker Comp FL headers and they fit great! Ive been looking at pictures of chevelle headers and G Body BRP's and F Body headers and the Chevelle Swap and BRP'S look very similar.
So my questions is has anyone out there tried/or put Chevelle swap headers in a G Body before.
Thanks any info would be greatly appreciated!
02-27-2012, 03:02 PM
#2
Teching In
Thread Starter
Join Date: Oct 2010
Location: Dayton, Ohio
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Within 1 or 2 weeks I will make a full build/swap thread with pictures. Im collecting parts right now while Im waiting on my 98 LS1 from the motor shop. Here is a small run down of the set-up.
98 LS1
LS6 Intake
Performance Products TB
CNC Ported Stock heads
CAM? Still in the decision process, but it had a 647 lift before but changing it to just under 600 lift with less duration. Going more for a street set up.
Mahle Forged Pistons
Scat Rods
More info coming with the build thread!
98 LS1
LS6 Intake
Performance Products TB
CNC Ported Stock heads
CAM? Still in the decision process, but it had a 647 lift before but changing it to just under 600 lift with less duration. Going more for a street set up.
Mahle Forged Pistons
Scat Rods
More info coming with the build thread!
