Another LS240sx
09-15-2012, 08:58 PM
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Jan 2003
Location: Austin, TX
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Another LS240sx Been mulling over the idea of an S13 240sx and last night at the track my stock bottom end finally cut loose in my T/A, so time to actually build a 240! Going to pull the built T56, clutch, harness and pcm out of the Trans Am and sell it as a roller, do I need anything else out of it? Obviously not the blown motor, going 6.0 for that. Accessories will be pulled also.
What's the best bolt in swap kit for these cars? I've done a little poking around, seems like sikky is pretty good, can anyone vouch for them or another company?
What's the best bolt in swap kit for these cars? I've done a little poking around, seems like sikky is pretty good, can anyone vouch for them or another company?
09-15-2012, 10:22 PM
#3
When I do my swap im going with fueled racing for several reasons.
1.) They have a nice moroso oil pan with baffles
2.) Its quite a bit cheaper than sikky
3.) Tried and true just the same
4.) I know their headers can clear a 4l60e as im probably going to go auto.
Go check out silviav8forums.com. that will be super helpful it has literally everything you need to know.
1.) They have a nice moroso oil pan with baffles
2.) Its quite a bit cheaper than sikky
3.) Tried and true just the same
4.) I know their headers can clear a 4l60e as im probably going to go auto.
Go check out silviav8forums.com. that will be super helpful it has literally everything you need to know.
