95 silverado LT1 swap questions (has anyone done one)
11-30-2013, 08:56 AM
#1
Registered User
Thread Starter
Join Date: Nov 2013
Location: TEMPLE TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
95 silverado LT1 swap questions (has anyone done one) hello i am a newbie on this forum I am swapping a lt1 inplace of an old TBI 350 on an 95 silverado 4x4... has anyone done this swap thats on this forum everything will bolt up fine and i have the LT1 harness mostly figured out but i cant find any good schamatics for the truck iv figured out how to run fuel pump but cant find were the guage wires are all ran or were to plug the VSS wire or TTC or park/neutral switch wire? were in the truck harness i might find these? any helpful tips/coments greatly appreciated thank you
12-01-2013, 12:22 PM
#3
Registered User
Thread Starter
Join Date: Nov 2013
Location: TEMPLE TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
on the LT1 harness i have a Drk Green/ white wire that signals the speedo gauge (VSS) and i cant find were to splic it into the truck harness.. same with the TTC wire (Lt Blue/black) needs a 12v wen the brake pedal is not pressed.. and the park neutral feed wire (Orange/black) needs a ground wen truck is in park/neutral.. i cant find any good truck diagrams i have a Clinton manual for tuck but it just shows TBI 350 engine schamatic
