AmericanRacingHeaders now has "G-Body LS Swap" headers.................(FEB.2014)....
#28
TECH Fanatic
iTrader: (2)
As soon as I get the car back on the ground and adjust my ride height I'll post some pics. But overall they clear everything and I'm pleased with them. I'm waiting on parts so it will be next week......hopefully. These headers were the easiest headers I've ever installed.
#29
TECH Fanatic
iTrader: (2)
Pics finally.....
Sorry for the delay but I encountered other issues I had to work out. Just so you guys know, I have 3.5" collectors with a three bolt flange and its approx. 3.5" off the ground. If you don't get the flanges you'll have an extra 1/2" of clearance. The primary tubes around the A-arms are 4" off the ground. My fender to ground height is 26 1/2". All in all I'm pleased with these headers. They clear everything very good but I feel they could of been a little closer to the floor and my MSD number 2 and 4 spark plug wires come very close to the tubes. Number 4 actually touches the tube so I had to tie strap it to the dipstick tube.
Thought I'd add that the headers look nothing like the picture on their website. They are not equal length headers.
Thought I'd add that the headers look nothing like the picture on their website. They are not equal length headers.
Last edited by Monte4ever; 07-10-2015 at 10:34 AM.