Cam Position Sensor Info
#1
Cam Position Sensor Info
While I was pulling out the engine on my Chevelle. The Cam Sensor connector got hooked on something (I know I disconnected it) and while the engine was being pulled out.. the connectors pulled away from the wires.
Does anyone have the connector pin diagram or which wire goes to which term and what color wire?
I can't find my Wiring info and Diagrams right now.. so if someone could provide the info. that would help.
thanks.
BC
Does anyone have the connector pin diagram or which wire goes to which term and what color wire?
I can't find my Wiring info and Diagrams right now.. so if someone could provide the info. that would help.
thanks.
BC
#3
G-Body.. thanks..
Do you also have the connector diagram ?.. I can assume that looking into the connector with the Clip on the top.. it would be A on the left with C on the Right side..
I don't want to get them backwards. I did find a picture of the connector (on Ebay).. and the it looks like A is on the left with C on the Right..
BC
Do you also have the connector diagram ?.. I can assume that looking into the connector with the Clip on the top.. it would be A on the left with C on the Right side..
I don't want to get them backwards. I did find a picture of the connector (on Ebay).. and the it looks like A is on the left with C on the Right..
BC
#4
Ok, checked the wires all the way back to the ECM connector to make sure I didn't do more damage to the wire somewhere up stream of the connector and the ECM. All checked out good. Picked up some new 150 terminals and reassemble it.. should know if my work is good by end of next week. As I want to clean/detail the underside before I stick the engine and trans back in..
G-Body... thanks for the info..
BC
G-Body... thanks for the info..
BC