ralphtackett1

I know the pcm won't work some will mine won't but will the harness

lsxRanger94

Yes. I used the instructions from lt1swap.com. It had pics and what pcm needed for the conversion.

ls1nova71

iTrader: (4)

You'll need the TPS and IAC pigtails to wire into your harness, but its not that hard. That 6.0 PCM was still in that truck as of Friday.

ralphtackett1

Hey Eric how hard is not that hard I have a harness pinned out already I just need to wire in the relays and a fuse block o and believe it's the pedal connector it has a couple wires that I pulled out of the same plug as the injectors are plugged into I could use help on that and I am heading down there today if it's there I am going to grab it