Dynatech swap headers...
07-27-2014, 08:05 PM
#1
Dynatech swap headers... Anyone got pix? There are 3 listed on Speedway Motors, 19410 (gen II Camaro), 21410 (gen II Nova), and... Nevermind, the Chevelle headers seem to have disappeared. They do make a couple Mustang swap headers too, 91310 & 91410. I'm pretty much looking for 1 7/8" long tubes for a custom swap and would like to see pix, especially the DR side around the steering area. BTW, Dynatech's site shows a generic SBC header no matter what part number you pull up ? ? ?
07-30-2014, 11:13 AM
#5
Launching!
iTrader: (7)
Join Date: May 2010
Location: 510
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
i have the mustang swap headers...no pics though. the tubes that go on the outside of the steering shaft come pretty far out from the head, and collectors come down and away from the motor pretty far, how much room do you have to work with?
07-30-2014, 08:00 PM
#6
Just so happens I stuck a pair of heads on my swap today, here are a few pix. The one dim I can't deviate from is the 26" between the frame rails until the rear of the block where it starts to swell out to 30". I did find a couple good shots of the 19410's on Google, the 21410's have the front tubes sweeping up and back which I'd like to stay away from. Haven't Googled the Mustang headers yet...