Blown Methanol ls1 powered ke55 4 link tubed
#1
Blown Methanol ls1 powered ke55 4 link tubed
A good freind of mine built this car a few years back with a sbc and
now its a ls1 with a 6/71 sheetmetal intake sbe ls1 with BTR racing
valve springs and pushrods it makes about 9 psi in its current
setup and about 480 rwhp at 6500 rpm with the stock cam.
Its a th400 tranny and 9 inch rear with 4 link and 12 point cage.
now its a ls1 with a 6/71 sheetmetal intake sbe ls1 with BTR racing
valve springs and pushrods it makes about 9 psi in its current
setup and about 480 rwhp at 6500 rpm with the stock cam.
Its a th400 tranny and 9 inch rear with 4 link and 12 point cage.
Trending Topics
#9
its just stock commodore ls1 brackets milled to make them sit closer to
the motor plate.
yes early vt-vy motor,sbe.
the motor plate.
yes early vt-vy motor,sbe.
#10
fuel pump cant keep up,motor went lean,popped 7 and 8 rods
melted plug number 5,bearing look like new still rods n piston
not so much.
he said time for a good fuel pump and motor
melted plug number 5,bearing look like new still rods n piston
not so much.
he said time for a good fuel pump and motor