SN95 LS swap
#2
10 Second Club
iTrader: (9)
Join Date: Jan 2004
Location: Daytona Beach, FL
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Dynatech 715-91310 is a LSX swap header for the sn-95. Kooks Also Makes one but twice the cost.
Here is the link to my build thread for our shop car. It is the 4th one we have done. If you have any questions just let me know.
#3
TECH Fanatic
iTrader: (5)
You can use a stock K member but would have serious limitations on the headers that would work with it and they retain a lot of weight where you don't want it, over the front axle. Most long tubes are for aftermarket K members. Hedman makes a nice set of mid length headers that are supposed to work with stock K members, they come coated or painted.
#5
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Dec 2010
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
You can use a stock K member but would have serious limitations on the headers that would work with it and they retain a lot of weight where you don't want it, over the front axle. Most long tubes are for aftermarket K members. Hedman makes a nice set of mid length headers that are supposed to work with stock K members, they come coated or painted.