help with LT1 from '96 camaro swap into 1970 chevelle
02-19-2015, 06:01 PM
#1
Registered User
Thread Starter
Join Date: Feb 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
help with LT1 from '96 camaro swap into 1970 chevelle I'm swapping an LT1 into my 1970 chevelle but I am having some wiring hang ups. I had someone start the project for me but due to some conflicts I took the car back from the guy not on good terms so i can't ask him to explain some of the things he was planning on doing.
Long story short I'm trying to figure out what these 3 connectors are and what should be wired to them. I've attached some pictures.
Thanks for any help.
Long story short I'm trying to figure out what these 3 connectors are and what should be wired to them. I've attached some pictures.
Thanks for any help.
02-19-2015, 06:20 PM
#2
Pop, This section is for converting LSx engines in to non LSx vehicles.
You might be better off over at camaroz28.com for LT questions.
and you'll find anything you need for LT1 wiring here http://www.shbox.com/
I only recognize one of those connectors as being part of LT wiring harness, I assume the others are on the body side?
You might be better off over at camaroz28.com for LT questions.
and you'll find anything you need for LT1 wiring here http://www.shbox.com/
I only recognize one of those connectors as being part of LT wiring harness, I assume the others are on the body side?
