Steven32

Ya that's another thing too. Didn't want to mess around with the stock speedo issues.

Steven32

That would be a bad *** build! Just let me know!

I'm technically in Cedar Park too. We should meet up, I'd like to check out your car.
Thanks man!! I got lucky with having a clean car from the beginning.

Steven32

Getting prepped for when the tubular bumper support and radiator support get in.

Steven32

Not my car, but the same tubular bumper and rad support that I'm having made. Should be done in the next day or so.

ls3fox

Ill definetly be keeping an eye on this as im doing the same with my car but looks great so far

Steven32

Thanks!
Hopefully should be close to being finished (including the turbo setup) within a couple months.

Steven32

K member starting to go in.

4x4head

Anytime, I'm out in the garage most nights. Send me a pm sometime.

Steven32

Will do!

Steven32

Coilovers are in. Turned out the front sway bar links and bushings were toast to I got those ordered to be swapped out.

Steven32

Front bumper support is in. The lower radiator support has been cut and now the tubular radiator support needs to be welded in its place.

Steven32

I'm nickel and diming right now until the bike sells. Once that happens, I should have enough funds to get about 90% of the remaining needed items to get it done.
Goal is to have everything I need by the end of June.

Ordered the rear end brace from Team Z for now. Should be in soon, but will wait to have it put on until I have everything I need for the rear end upgrade.

345LSX

Nice build so far.....where are you getting the tubular bumper and rad support from ?

Steven32

Thanks!!!!

Eric Campbell made them. Excellent product, I highly recommend him.
They were $300 shipped for the tubular bumper and radiator supports.

https://m.facebook.com/eric.campbell...urce=typeahead

ls3fox

Are you doing the upper radiator support as well?

Steven32

Just the lower for now.

fstfox87

I'm doing a similar build in my 87', what are you doing for a fuel system?

JoshD

iTrader: (1)

I bought the tube bumper and core support from Eric Campbell as well. Did you bolt the bumper support directly to the old support or did you make some stand=offs? Also for the core support, mine was just a piece of bent tubing. Did your's come with some c-channel brace to weld to the frame like the Team Z unit?

2ndGenLSX

Nice car! I'm not a huge mustang fan but fox coupes are good lookin cars no doubt. And I love those fr500s or whatever they're called.

Steven32

I think he just bolted it directly on.
You should have received these with the rad support too.