First gen f-body swappers, where are you mounting the PCM?
07-06-2015, 08:28 PM
#1
First gen f-body swappers, where are you mounting the PCM? In a bit of a spot here as I only have the shell to work with and we are pushing forward looking to tuck the harnesses in nice and clean and fire this thing. I want to mount the PCM under the dash on the drivers side if possible but all I have now is the column.... no ducting, no controls, and im worried it will not fit as its tight under there. So i thought to reach out to the experts to see what you all might suggest? First gen LS1/4L80 411 PCM. Pics and/or links would be GREAT i searched but didnt find much.
Thanks all
Thanks all
07-06-2015, 11:34 PM
#2
on my '67 Firebird I have mine in the inside passenger side firewall. I'm not running any heater/ ac, etc so there is plenty of room on this side. Agreed I think it'd be tight on the driver side with the pedals in the way.
Last edited by tuske427; 07-06-2015 at 11:54 PM.
07-07-2015, 01:21 PM
#3
11 Second Club
iTrader: (46)
Join Date: Feb 2004
Location: jacksonville, fl
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
I have mine in the space behind the kick panel on the passenger side. Plenty of room and you can route your harness low enough to still have room for ac/heat
07-07-2015, 10:41 PM
#4
We were hoping to get it interior mounted just for clean factor. Without the ducting and pedals and whatnot its a crap shoot hence this thread. The car is getting a heater and we want to retain the glove box. Pass side kick panel sounds good, got any pics by chance? Thanks fellas