ls2 into silverado
12-29-2005, 11:35 AM
#1
Teching In
Thread Starter
Join Date: Aug 2005
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
ls2 into silverado what would be required to swap a 5.3 for gmpp ls2 . thanks
I am new to the current generation differences.
I am new to the current generation differences.
Last edited by donpenn; 12-29-2005 at 03:35 PM.
12-29-2005, 11:55 AM
#2
TECH Resident
That would be one of the easiest swaps you could do! It would be a real beast I think. Get with Speartech on the computer end of it, build a good exhuast system and bolt it together.
12-29-2005, 08:18 PM
#4
TECH Resident
There are some issues with sensors moving, and some issues with different connectors needed. The Map sensor moves, the injector conenctors are all different, the knock sensors move, and the Cam position sensor moves.
I think that might be it??
Also, the way the truck harness routes doesn't look real good when it is stuck on top of a nice new Vette intake, it kind of covers it down the center, and then goes out the side. Not very attractive.
I think that might be it??
Also, the way the truck harness routes doesn't look real good when it is stuck on top of a nice new Vette intake, it kind of covers it down the center, and then goes out the side. Not very attractive.
12-30-2005, 08:34 AM
#5
Teching In
Thread Starter
Join Date: Aug 2005
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys. I left out that the truck is an 06 so i think the knock sensor location is the same? but the other stuff i will look into. any more info would be great . again thanks, don
Any recomendations on a modified harness source? I am kind of looking for plug and play for the most part.
Any recomendations on a modified harness source? I am kind of looking for plug and play for the most part.
Last edited by donpenn; 12-30-2005 at 12:53 PM.
