383 carbed 2000 ta
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: May 2007
Location: schaumburg,il
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
383 carbed 2000 ta
hey guys im doing a 383 stroker in my car all the computer **** is coming out its gonna be carbed and puttin out about 800hp i was wonderin if any of you have any similar setups and have passed emissions, cause yea its gonna be just a track car i would like to on occasion take it out and cruise with my buddies. so if any of you have any suggestions on how i could pass or wat you have done let me know thanks. tony
#3
TECH Fanatic
iTrader: (4)
Join Date: Mar 2007
Location: Twin Cities, MN
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
In what state? Most states are not going to allow you to pull the emmisions equipment off of a late-model car. To get 800hp, you are going to ditch everything, and not a lot of states will allow that.
#4
TECH Resident
iTrader: (2)
Join Date: Jun 2006
Location: Roswell, GA
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
Actually I take that back--you could get a carb to pass 2000 vehicle emissions, if it's a state without any visual inspection for OBD2 vehicles. All you'd need to do is put together a PC with sufficient D/A outputs and write some software to simulate all of the sensors of a running LS1. Wire that up to the stock PCM, and leave the OBD2 connector in the stock location. That'd still be illegal though.
#5
Small block + a Huge cam + a lot of compression + a carb = Any moron would hear that its been modded a lot. It might get 800 HP but you will probably get several fines just for pulling up to your local test station. Hell they might even arrest you for being dumb enough to try it. Not going to work out good for you at all.