Need drive by wire 10 pin connector
05-01-2008, 02:52 PM
#1
Need drive by wire 10 pin connector I've got a drive by wire setup from an 02 escalade. I have the wiring diagram, TAC module and pedal assembly. I have the 10pin connector for the pedal, but I need another 10 pin connector for the TAC module end.
My local chevy dealer says they dont sell the connector alone, and the harness is part of the whole dash harness, so that's not an option.
Anyone know a source for those connectors?
My local chevy dealer says they dont sell the connector alone, and the harness is part of the whole dash harness, so that's not an option.
Anyone know a source for those connectors?
05-01-2008, 02:59 PM
#2
Launching!
iTrader: (1)
Join Date: Jul 2006
Location: Montgomery, IL
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Terminal Supply Co. 630-730-7814
#12065425 female
#12045808 male
#12124264 lock
You will also need the pins.
I would walk around a couple of junkyards first though
#12065425 female
#12045808 male
#12124264 lock
You will also need the pins.
I would walk around a couple of junkyards first though
05-01-2008, 05:21 PM
#5
Thanks, the link above seems to have the connector.
But could you check on pin assignment regarding my other post.
"On the schematic, the pins on the accellerator petal sensor and TAC module all line up, A to A, B to B, etc....
Except for J and E, they're switched. Is the schematic correct? "
BTW, amazing headers on your turbo motor pics.
But could you check on pin assignment regarding my other post.
"On the schematic, the pins on the accellerator petal sensor and TAC module all line up, A to A, B to B, etc....
Except for J and E, they're switched. Is the schematic correct? "
BTW, amazing headers on your turbo motor pics.
