About to install my BMR K-Member + A-Arms!
#1
TECH Regular
Thread Starter
Join Date: Dec 2005
Location: Kailua-Kona, HI
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
About to install my BMR K-Member + A-Arms!
I just received my Tubular K-Member, Adj, Lower Control Arms, and Subframe connectors from BMR Yesterday! I am so stoked! The products look awesome! I thought they would come in red, but BMR now offers a 'Hammered Finish' powdercoat that looks sweet!
For those of you who are not familiar with my vert, it is an 00' SS Clone, 16k miles 362rwhp/347rwtq N/A, 498rwhp/511rwtq Spray.
As far as suspension/chassis is concerned, I only have a Strut brace, Sportlines/Bilsteins, trans tunnel brace installed so far.
This weekend I am going to install the K-Member, SFC's, A-Arms, and I also have a set of LCA's and an Adj. Panhard rod laying around waiting to be put in. This thing is going to go from Loose to tight in a weekend!, I can't wait.
Next month I am going to get a UMI Torque arm that mounts in the trans tunnel with a DS loop, some LCA reloc. brackets, and a converter. I figure I better install a DS loop when I do the converter OR ELSE. HAha.
Anyway, I have no Idea how many guys have Verts with tubular front ends on them, so I wanted to see who does. WHO HAS A TUBULAR FRONT END? HOW DOES IT FEEL COMPARED TO STOCK?
Aloha, Matt
For those of you who are not familiar with my vert, it is an 00' SS Clone, 16k miles 362rwhp/347rwtq N/A, 498rwhp/511rwtq Spray.
As far as suspension/chassis is concerned, I only have a Strut brace, Sportlines/Bilsteins, trans tunnel brace installed so far.
This weekend I am going to install the K-Member, SFC's, A-Arms, and I also have a set of LCA's and an Adj. Panhard rod laying around waiting to be put in. This thing is going to go from Loose to tight in a weekend!, I can't wait.
Next month I am going to get a UMI Torque arm that mounts in the trans tunnel with a DS loop, some LCA reloc. brackets, and a converter. I figure I better install a DS loop when I do the converter OR ELSE. HAha.
Anyway, I have no Idea how many guys have Verts with tubular front ends on them, so I wanted to see who does. WHO HAS A TUBULAR FRONT END? HOW DOES IT FEEL COMPARED TO STOCK?
Aloha, Matt
#2
Staging Lane
iTrader: (1)
Join Date: Aug 2005
Location: East Bay Area
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
thats dope man. Im also doing my suspension. So far i have a madman co tq arm, lca's, panhard rod, lower squat brackets, wolfe anti roll sway bar, hal shocks and front springs and umi subframes. I havent installed them yet because im waiting on my 9" differential. Im also going to go with tubualr A arms and K member. Post some pics and tell us how it goes.
#4
LS1Tech Premium Sponsor
iTrader: (6)
Join Date: Jun 2004
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
I just received my Tubular K-Member, Adj, Lower Control Arms, and Subframe connectors from BMR Yesterday! I am so stoked! The products look awesome! I thought they would come in red, but BMR now offers a 'Hammered Finish' powdercoat that looks sweet!
For those of you who are not familiar with my vert, it is an 00' SS Clone, 16k miles 362rwhp/347rwtq N/A, 498rwhp/511rwtq Spray.
As far as suspension/chassis is concerned, I only have a Strut brace, Sportlines/Bilsteins, trans tunnel brace installed so far.
This weekend I am going to install the K-Member, SFC's, A-Arms, and I also have a set of LCA's and an Adj. Panhard rod laying around waiting to be put in. This thing is going to go from Loose to tight in a weekend!, I can't wait.
Next month I am going to get a UMI Torque arm that mounts in the trans tunnel with a DS loop, some LCA reloc. brackets, and a converter. I figure I better install a DS loop when I do the converter OR ELSE. HAha.
Anyway, I have no Idea how many guys have Verts with tubular front ends on them, so I wanted to see who does. WHO HAS A TUBULAR FRONT END? HOW DOES IT FEEL COMPARED TO STOCK?
Aloha, Matt
For those of you who are not familiar with my vert, it is an 00' SS Clone, 16k miles 362rwhp/347rwtq N/A, 498rwhp/511rwtq Spray.
As far as suspension/chassis is concerned, I only have a Strut brace, Sportlines/Bilsteins, trans tunnel brace installed so far.
This weekend I am going to install the K-Member, SFC's, A-Arms, and I also have a set of LCA's and an Adj. Panhard rod laying around waiting to be put in. This thing is going to go from Loose to tight in a weekend!, I can't wait.
Next month I am going to get a UMI Torque arm that mounts in the trans tunnel with a DS loop, some LCA reloc. brackets, and a converter. I figure I better install a DS loop when I do the converter OR ELSE. HAha.
Anyway, I have no Idea how many guys have Verts with tubular front ends on them, so I wanted to see who does. WHO HAS A TUBULAR FRONT END? HOW DOES IT FEEL COMPARED TO STOCK?
Aloha, Matt
#5
TECH Regular
Thread Starter
Join Date: Dec 2005
Location: Kailua-Kona, HI
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Lee, I appreciate your help in getting this stuff over to me in Hawaii quickly, the products look excellent. I already had it torn apart before I ordered the BMR stuff so install shouldn't be too bad.
Trending Topics
#11
TECH Apprentice
iTrader: (2)
Join Date: Aug 2004
Location: Central Massachusetts
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Here ya go... just follow the link.
https://ls1tech.com/forums/suspension-brakes/763317-umi-kmember-arms-install-guide.html
https://ls1tech.com/forums/suspension-brakes/763317-umi-kmember-arms-install-guide.html