The Blazemobile Hits the MTI Dyno For Check Up
03-20-2005, 07:31 AM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Houston
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
The Blazemobile Hits the MTI Dyno For Check Up My MTI heads and cam package was installed in August of 2004 and dynoed then at 417rwhp corrected.
I thought I'd take it back and have it checked out since it's been 7 months. MTI's Wideband setup confirmed the A/F ratios were right on. Made even more power
only change has been adding the Exedy Hyper Single clutch. The clutch/flywheel assy did drop off about 15 lbs if I recall correctly.
Anyway "Drum Roll" 426rwhp and 400ft/lbs torque corrected and 432.6rwhp and 406.5ft/lbs torque actual.
I thought I'd take it back and have it checked out since it's been 7 months. MTI's Wideband setup confirmed the A/F ratios were right on. Made even more power
only change has been adding the Exedy Hyper Single clutch. The clutch/flywheel assy did drop off about 15 lbs if I recall correctly. Anyway "Drum Roll" 426rwhp and 400ft/lbs torque corrected and 432.6rwhp and 406.5ft/lbs torque actual.
