New PB full weight m6
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
New PB full weight m6
I had 2 new personal bests last night. Prior to last night my best was 11.45. First pass I made was an 11.36, but I can't find the slip anywhere. Below are the other 2 passes I made.
60'-1.668 1.641
330-4.775 4.736
1/8-7.300 7.266
mph-97.33 97.66
1000-9.485 9.453
1/4-11.325 11.296
mph-125.26 122.61
The 11.296 run was my last run of the night and I even hit the rev limiter in 3rd, I'm assuming that's why my mph was lower. The car has trapped 124 prior to last night but normally traps 121-122.
I was excited to say the least. I think the car has a little more in it, but for a full weight stock cubed m6 I'm satisfied with it for now. 28in et drags and a 150 shot for next year!
60'-1.668 1.641
330-4.775 4.736
1/8-7.300 7.266
mph-97.33 97.66
1000-9.485 9.453
1/4-11.325 11.296
mph-125.26 122.61
The 11.296 run was my last run of the night and I even hit the rev limiter in 3rd, I'm assuming that's why my mph was lower. The car has trapped 124 prior to last night but normally traps 121-122.
I was excited to say the least. I think the car has a little more in it, but for a full weight stock cubed m6 I'm satisfied with it for now. 28in et drags and a 150 shot for next year!
#2
11 Second Club
Wow, strong running car. Your setup is very similar to mine but I'm nowhere close to those times. What is your race weight? Is it still the stock bottom end? My guess is you have to be making somewhere around 460 rwhp.
Last edited by big dave; 10-09-2011 at 05:16 AM.
#7
Launching!
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for all the congrats and compliments! Sorry took so long to answer the questions but I ended up going to the LSX shootout in Indy yesterday. It was an awesome time!
I forgot to mention that the car does have the spare tire and jack removed along with the sway bar, but that's it.
When I weighed the car it had 1/8 tank of gas and it was 3510 with me. I'm 160lbs. Bottom end does have forged pistons with 4cc dish and ARP rod bolts. The CR is about 10.0-10.1 to 1. The car previously dynoed 438 as its highest but also did 43x on another dyno.
Yeah I need to get my 60ft down to the 1.5s and I think it will make a lot quicker pass.
DA was a little over 1100 and weight was 3510 last time I weighed it. Should be about the same.
Its just a radial from Tire Discounters. I think 165/80/15 Nexen or Nankang
I forgot to mention that the car does have the spare tire and jack removed along with the sway bar, but that's it.
Its just a radial from Tire Discounters. I think 165/80/15 Nexen or Nankang