help my 60's
05-06-2006, 06:58 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Oct 2005
Location: Miami, FL
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
help my 60's I went to the track last night and had a hard time catching a good 60'. My first run I torquebraked to ~1500 and went WOT at the green fairly quickly and managed a 2.143 when the track just opened. Then on my second run I got a 2.269 without torquebraking and jsut going WOT. Then I tried the 1500 torque brake to WOT again with a shitty 2.388, and 2.369. I went only to 1000 once and managed a 2.261 but I had a hard time replicating that.
I dunno if the track prep just went to crap after some rubber was laid down, but my 60's were terrible. my best ET was with the 2.261 (13.858@103.28) becuse I let out early on my first run
cause the guy next to me did.
BTW I know my trap speed is below par for a 3.23 A4 with lid and cut-out, but I expected it to be worse with my lame as dyno #s. Should I be reasonably satisfied with consistent low 103 traps?
and also this was at Moroso which has a bad rep, do you guys think I could manage 2.0X's and 2.1X's at a decent track like Gainesville (if you happen to be familiar with both,) and would that get me a ~13.5?
I dunno if the track prep just went to crap after some rubber was laid down, but my 60's were terrible. my best ET was with the 2.261 (13.858@103.28) becuse I let out early on my first run
cause the guy next to me did.BTW I know my trap speed is below par for a 3.23 A4 with lid and cut-out, but I expected it to be worse with my lame as dyno #s. Should I be reasonably satisfied with consistent low 103 traps?
and also this was at Moroso which has a bad rep, do you guys think I could manage 2.0X's and 2.1X's at a decent track like Gainesville (if you happen to be familiar with both,) and would that get me a ~13.5?
