Liiiiiiitle closer to the 10's last night
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Liiiiiiitle closer to the 10's last night
Last year was running 11.40's@120 with sub 1.6 60's - best of 11.46@120 on a 1.67 60'
Ran tonight and got an 11.3762@120.32 with a 1.6992 60'
That's the first 1.6 this year - all else have been mid 1.7's so far. I really wish I could launch full throttle off of this Edge 3800 but that's impossible right now.
If I can hit a sub 1.6 sometime this year she might go 0's. Best chance for a sub 1.6 is going to be June 19th - we've rented Norwalk and the track is usually VERY sticky for us. I will have my front QA1's/drag springs and chassis mount TA installed by then so hopefully it happens. I was really shooting for mid 1.5's this year but wow does this converter hit hard.
Ran tonight and got an 11.3762@120.32 with a 1.6992 60'
That's the first 1.6 this year - all else have been mid 1.7's so far. I really wish I could launch full throttle off of this Edge 3800 but that's impossible right now.
If I can hit a sub 1.6 sometime this year she might go 0's. Best chance for a sub 1.6 is going to be June 19th - we've rented Norwalk and the track is usually VERY sticky for us. I will have my front QA1's/drag springs and chassis mount TA installed by then so hopefully it happens. I was really shooting for mid 1.5's this year but wow does this converter hit hard.
#3
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Found out last night that i've broken the stock torque arm - this could explain a lot to me. I've been down the track about 25 times this year so far and have only cracked 2 high 1.69 60's - as opposed to 1.61-1.64 pretty much every single pass last year.
Most of the runs this year so far have been 1.75+ - very very bad.
Fixing tonight with a new clamshell - I can't wait to get the chassis mount TA installed - will eliminate this POS stock torque arm.
Most of the runs this year so far have been 1.75+ - very very bad.
Fixing tonight with a new clamshell - I can't wait to get the chassis mount TA installed - will eliminate this POS stock torque arm.