1000' track results!!!
08-26-2006, 11:05 PM
#1
1000' track results!!! I did my baseline ET before my longtube headers install and also it was my first time to run/race an automatic car in a track. Here are the results:
Weather was partly cloudy, 94-95* temp. Started racing @ 5 pm and stop around 7ish.
First run was crappy, this was my first race in an automatic so I had to make the feel of launching it at the right RPMs w/o spinning.
60':2.6
330':6.3
1/8 ET:9.45
1/8 MPH:81.63
1000' ET:11.85
1000' MPH:95.06
BTW, this is my first race. ^^ I spunned 1-2-3 shifts launching @ 1200 rpms (stalling it).
60':2.22
330':6.00
1/8 ET:9.06
1/8 MPH:82.01
1000' ET:11.45
1000' MPH:95.79
60':2.41
330':6.24
1/8 ET:9.32
1/8 MPH:81.64
1000' ET:11.71
1000' MPH:95.46
60':2.17
330':5.93
1/8 ET:8.97
1/8 MPH:82.40
1000' ET:11.35
1000' MPH:96.22
60':2.43
330':6.44
1/8 ET:9.69
1/8 MPH:78.44
1000' ET:12.18
1000' MPH:89.13
Spun again 1-2-3 shifts and even went sideways!!^^^
60':2.19
330':5.96
1/8 ET:9.01
1/8 MPH:82.39
1000' ET:11.38
1000' MPH:96.15
60':2.14
330':5.90
1/8 ET:8.95
1/8 MPH:82.52
1000' ET:11.32
1000' MPH:96.34 This is my best ET/MPH so far.
60':2.18
330':5.94
1/8 ET:8.98
1/8 MPH:82.55
1000' ET:11.35
1000' MPH:96.28
60':2.17
330':5.93
1/8 ET:8.9
1/8 MPH:82.37
1000' ET:11.36
1000' MPH:96.15
Good news is I'm faster than LS1 T/A M6 w/ similar mods as I am bad news on a roll the LS1 T/A M6 smokes my arss from a 50 roll w/ 2 car lengths.
Other good news is my Z28/auto w/ 2.73 rear is this fast with just true duals, K&N/lid bolt ons and the free mods which I don't think worth mentioning. With adding +/- 2 full seconds ETs of my car for the rest of 320 ft that is short of 1/4 mile the z28 "should" be around 13.01-13.3s with better 60'. I can't wait to see what w/ the headers would do to cut my ETs down. Maybe .2-.3? Add a bigger 3200 stall= low to mid 12s.
Weather was partly cloudy, 94-95* temp. Started racing @ 5 pm and stop around 7ish.
First run was crappy, this was my first race in an automatic so I had to make the feel of launching it at the right RPMs w/o spinning.
60':2.6
330':6.3
1/8 ET:9.45
1/8 MPH:81.63
1000' ET:11.85
1000' MPH:95.06
BTW, this is my first race. ^^ I spunned 1-2-3 shifts launching @ 1200 rpms (stalling it).
60':2.22
330':6.00
1/8 ET:9.06
1/8 MPH:82.01
1000' ET:11.45
1000' MPH:95.79
60':2.41
330':6.24
1/8 ET:9.32
1/8 MPH:81.64
1000' ET:11.71
1000' MPH:95.46
60':2.17
330':5.93
1/8 ET:8.97
1/8 MPH:82.40
1000' ET:11.35
1000' MPH:96.22
60':2.43
330':6.44
1/8 ET:9.69
1/8 MPH:78.44
1000' ET:12.18
1000' MPH:89.13
Spun again 1-2-3 shifts and even went sideways!!^^^
60':2.19
330':5.96
1/8 ET:9.01
1/8 MPH:82.39
1000' ET:11.38
1000' MPH:96.15
60':2.14
330':5.90
1/8 ET:8.95
1/8 MPH:82.52
1000' ET:11.32
1000' MPH:96.34 This is my best ET/MPH so far.
60':2.18
330':5.94
1/8 ET:8.98
1/8 MPH:82.55
1000' ET:11.35
1000' MPH:96.28
60':2.17
330':5.93
1/8 ET:8.9
1/8 MPH:82.37
1000' ET:11.36
1000' MPH:96.15
Good news is I'm faster than LS1 T/A M6 w/ similar mods as I am bad news on a roll the LS1 T/A M6 smokes my arss from a 50 roll w/ 2 car lengths.
Other good news is my Z28/auto w/ 2.73 rear is this fast with just true duals, K&N/lid bolt ons and the free mods which I don't think worth mentioning. With adding +/- 2 full seconds ETs of my car for the rest of 320 ft that is short of 1/4 mile the z28 "should" be around 13.01-13.3s with better 60'. I can't wait to see what w/ the headers would do to cut my ETs down. Maybe .2-.3? Add a bigger 3200 stall= low to mid 12s.
