Heads & Cam?
02-20-2004, 11:57 PM
#1
On The Tree
Thread Starter
Join Date: Jan 2004
Location: El Paso, Texas, USA
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Heads & Cam? I recently took the car to the track and ran a 13.4@107mph with a 2.3 60'. I am in the process of installing the heads/cam. How much should I expect my et's to lower given the exact 60' and conditions? I am at an elevation of 4000ft. The heads have 2.02/1.60 Ferrea Valves fully ported and flowed 300cfm's@.600. The cam is a Comp Cams 224/224 .581/.581 112lsa.
My current mods are Hooker LT's, Off-Road Y-Pipe, Loudmouth, ASP UD Pulley, K&N FIPK and Ported Throttle Body. And I am running on 315/35/17 Nitto Drags. The car is an '02 WS6/M6.
Thanks
Ever
My current mods are Hooker LT's, Off-Road Y-Pipe, Loudmouth, ASP UD Pulley, K&N FIPK and Ported Throttle Body. And I am running on 315/35/17 Nitto Drags. The car is an '02 WS6/M6.
Thanks
Ever
02-21-2004, 12:10 AM
#2
On The Tree
Join Date: Dec 2002
Location: New Haven MI
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Don't ask me Ever, I've done my build, and I'm runnin' slower than that!! Course, it's all about driver skill, and I admit, I ain't got none!! You gonna be out there this Sunday?