Wiring up a MSD 2 step in 99 Camaro???
#1
TECH Regular
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Colorado
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Wiring up a MSD 2 step in 99 Camaro???
Need a little help,
I understand how it works and I have installed the 2 step. I ran a wire into the car.
However I want to hook it up to the clutch switch and a push button switch on my shift.
Do I use the ground from the MSD box or the 12V wire???
On the clutch switch the lower switch has a green wire and a purple with white strip, which wire do I splice into before running to my push button?
I tested both wire with a test light and either showed power. I had the key on and the clutch pushed down, do I need to try to completely start the car before it the wires show power?
Thanks in advance!!!
I understand how it works and I have installed the 2 step. I ran a wire into the car.
However I want to hook it up to the clutch switch and a push button switch on my shift.
Do I use the ground from the MSD box or the 12V wire???
On the clutch switch the lower switch has a green wire and a purple with white strip, which wire do I splice into before running to my push button?
I tested both wire with a test light and either showed power. I had the key on and the clutch pushed down, do I need to try to completely start the car before it the wires show power?
Thanks in advance!!!
Last edited by 4U2NV-SS; 05-02-2012 at 12:11 PM.
#2
TECH Regular
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Colorado
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Well I did some more research....
Looks like I need to use the blue ground wire from the MSD box to my push button then splice it into the purple/white wire on my clutch pedal.
Can anyone confirm this???
Looks like I need to use the blue ground wire from the MSD box to my push button then splice it into the purple/white wire on my clutch pedal.
Can anyone confirm this???