New best w/ MTI stage II heads and hammer cam
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: West Palm Beach, Fl
Posts: 1,066
Likes: 0
Received 11 Likes
on
9 Posts
New best w/ MTI stage II heads and hammer cam
Not as good as many of you guys but good for me:
Car:
'00 Formula
-6 spd
-moser 12 bolt w/ 4.10s (installed about 2 wks ago, even w/ the extra weight gave 2+ mph)
-no t-tops, 16" wheels, nittos on back
-weight removal: spare & jack
-My weight: 225 (so around 3,600 race weight)
-all bolt ons
-MTI stage II LS6 heads
-Hammer cam 222/222, 561/561, 112
-rwhp w/ stk gears/rear - 423
-Temp 80-82, 80-85% humidity
60' 1.971, 2.052, 2.000, 1.965
ET 12.123, 12.136, 12.149, 12.089 (first 12.0x)
MPH 119.49, 119.52, 119.20, 119.52
Can't wait for cooler weather, 121 mph maybe? I am a happy camper.
Car:
'00 Formula
-6 spd
-moser 12 bolt w/ 4.10s (installed about 2 wks ago, even w/ the extra weight gave 2+ mph)
-no t-tops, 16" wheels, nittos on back
-weight removal: spare & jack
-My weight: 225 (so around 3,600 race weight)
-all bolt ons
-MTI stage II LS6 heads
-Hammer cam 222/222, 561/561, 112
-rwhp w/ stk gears/rear - 423
-Temp 80-82, 80-85% humidity
60' 1.971, 2.052, 2.000, 1.965
ET 12.123, 12.136, 12.149, 12.089 (first 12.0x)
MPH 119.49, 119.52, 119.20, 119.52
Can't wait for cooler weather, 121 mph maybe? I am a happy camper.
#2
TECH Addict
Join Date: Dec 2001
Location: Fort Worth,TX
Posts: 2,340
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best w/ MTI stage II heads and hammer cam
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Bill00Formula:
<strong>Not as good as many of you guys but good for me:
Car:
'00 Formula
-6 spd
-moser 12 bolt w/ 4.10s (installed about 2 wks ago, even w/ the extra weight gave 2+ mph)
-no t-tops, 16" wheels, nittos on back
-weight removal: spare & jack
-My weight: 225 (so around 3,600 race weight)
-all bolt ons
-MTI stage II LS6 heads
-Hammer cam 222/222, 561/561, 112
-rwhp w/ stk gears/rear - 423
-Temp 80-82, 80-85% humidity
60' 1.971, 2.052, 2.000, 1.965
ET 12.123, 12.136, 12.149, 12.089 (first 12.0x)
MPH 119.49, 119.52, 119.20, 119.52
Can't wait for cooler weather, 121 mph maybe? I am a happy camper.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Get a ported TB and ls6 intake manifold and you will hit 121mph right now.Excellent numbers.Did you change your plugs and plug wires during the install?Change you fuel filter etc...just somethings to do to see if you can get some more power.
<strong>Not as good as many of you guys but good for me:
Car:
'00 Formula
-6 spd
-moser 12 bolt w/ 4.10s (installed about 2 wks ago, even w/ the extra weight gave 2+ mph)
-no t-tops, 16" wheels, nittos on back
-weight removal: spare & jack
-My weight: 225 (so around 3,600 race weight)
-all bolt ons
-MTI stage II LS6 heads
-Hammer cam 222/222, 561/561, 112
-rwhp w/ stk gears/rear - 423
-Temp 80-82, 80-85% humidity
60' 1.971, 2.052, 2.000, 1.965
ET 12.123, 12.136, 12.149, 12.089 (first 12.0x)
MPH 119.49, 119.52, 119.20, 119.52
Can't wait for cooler weather, 121 mph maybe? I am a happy camper.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Get a ported TB and ls6 intake manifold and you will hit 121mph right now.Excellent numbers.Did you change your plugs and plug wires during the install?Change you fuel filter etc...just somethings to do to see if you can get some more power.
#5
TECH Junkie
iTrader: (2)
Re: New best w/ MTI stage II heads and hammer cam
I went No problem raceway (home of the Thunder raceing southern shootout) and ran a new best with my Hammer cam and stage 1 local ported heads 12.11 at 116.35 with a 1.80 60.ft. on Nittos with a m6 4.10's in a stock 10 bolt leaveing at 4000 rpm's and then givving the gas after it jumped out. This was in the same weather and same track that Allan Futral ran 10.93 last night . 1300 or so da and 95% humidaty ( fog). Race weight 3720 with t-top T/a and no weight removed at all. You gotto love the hammer cam for a sleeper. Futral calls it a baby cam <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#6
LS1Tech Co-Founder
iTrader: (38)
Re: New best w/ MTI stage II heads and hammer cam
Excellent trap speeds! You have a 12-bolt, get some real slicks because you are missing out BIGTIME on the most fun part of owning an M6 at the track. The violent launches! Go cut some 1.5X short times on slicks and you will never stop smiling.
-Tony
-Tony
#7
TECH Addict
iTrader: (3)
Join Date: Nov 2001
Location: HOU - yeah, you know the rest.
Posts: 2,959
Likes: 0
Received 1 Like
on
1 Post
Re: New best w/ MTI stage II heads and hammer cam
Congrats nice times. I had pretty much your same combo., but I had stock 3.42 gears and cut a 1.79 on 16" Nittos. With a little more practice or some slicks I'll bet you easily shave 3-4 tenths off your time and I wouldn't be suprised to see you hit 121 thru the traps. Good luck.