M/T ET Drags Tire Pressure
#1
10 Second Club
Thread Starter
iTrader: (2)
Join Date: Dec 2004
Location: Sumter, South Carolina
Posts: 1,386
Likes: 0
Received 1 Like
on
1 Post
M/T ET Drags Tire Pressure
Moving from BFG DRs to E/T Drags on Bogarts. Specifically 26x10 on 15" on rear. Using the M/T tubes. What are my high low tire pressure values? I'd ask for the the same info for the E/T Fronts ... 26x4.5 w/o tubes. Test n Tune is the 25th...FINALLY!! Thanks for the starting points.
#2
9 Second Club
iTrader: (4)
Join Date: Dec 2004
Location: Cali
Posts: 2,607
Likes: 0
Received 0 Likes
on
0 Posts
I run my ET Fronts at like 65-70psi i believe...
The backs (I run 28x10.5W ET Drags) but even when i had 26's the magic number for me was 13psi..... good hook off the line and nice control at the big end with not too much sidewall "walking" of the slick making the *** end feel really skittish....
The backs (I run 28x10.5W ET Drags) but even when i had 26's the magic number for me was 13psi..... good hook off the line and nice control at the big end with not too much sidewall "walking" of the slick making the *** end feel really skittish....
#3
10 Second Club
Thread Starter
iTrader: (2)
Join Date: Dec 2004
Location: Sumter, South Carolina
Posts: 1,386
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by OutlawZ
I run my ET Fronts at like 65-70psi i believe...
The backs (I run 28x10.5W ET Drags) but even when i had 26's the magic number for me was 13psi..... good hook off the line and nice control at the big end with not too much sidewall "walking" of the slick making the *** end feel really skittish....