SLPSS99

iTrader: (7)

Hey guys I am finally fed up with hearing my headers just barely(sp) hitting my floorpan, I know I have heard of people with this prob just wanted to hear the solution to fix the problem! This is a prob ONLY on the drivers side the passenger side has lots of clearence.

Thanks in advance!!
Dan

1BADAIR

iTrader: (1)

I put a prothane engine mount on the drivers side to stop the banging

tektrans

iTrader: (23)

Mine was hitting also. I let the car run for a bit so the exhaust got hot then I used a pry bar and nudged it down a bit.

cwaldt

iTrader: (4)

Pry bar + hammer does the trick.

SLPSS99

iTrader: (7)

Hmmm I will give the heating up and prying a try I guess for now. Does anybody know if solid motor mounts would lower the engine?

99ssleeper

iTrader: (98)

on my ss i put in a prothane mount and then elongated the holes on the collector flange about 1/8 with a dremel. i had my dad hold down on the collector under the car when i tightened it up, never had a problem after that. my drivers side header was about 1/4 from the floor before i did that.

the jet hots are my 2nd choice for that reason. thats why i went with the qtps this time, no issues at all and they were only $175 more with shipping included.

elitopus2002Z

poly motor/trans mounts plus BFH mod to give more room for true duals. headers are pacesetter