Got on the dyno today!
#1
Launching!
Thread Starter
iTrader: (22)
Join Date: Apr 2008
Location: lewistown, PA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Got on the dyno today!
Ive had my car for 3 years and had no clue what it was putting down so today i finally got on the dyno at wyotech. Mods are as follows, SLP lid and intake, SLP loudmouth catback, gutted cats, o2 sims, MSD wires, NGK TR55 plugs, Spec billet flywheel, centerforce dual friction clutch, throttle body coolant bypass, 4.10 gears, and 100shot of nitrous.
1st pull i went all motor to 5500RPM and made 335HP 349FT Lbs
2nd pull i sprayed but bottle pressure was low(800psi) made 372HP 416FT Lbs
3rd pull i went all motor to 6000RPM and made 340HP 352FT Lbs
This was all done on a dyno jet and are uncorrected number
I was pretty happy over all considering what i have done to it.
Heres a vid of the nitrous run
http://www.youtube.com/watch?v=Az2ELS9uN0Y
1st pull i went all motor to 5500RPM and made 335HP 349FT Lbs
2nd pull i sprayed but bottle pressure was low(800psi) made 372HP 416FT Lbs
3rd pull i went all motor to 6000RPM and made 340HP 352FT Lbs
This was all done on a dyno jet and are uncorrected number
I was pretty happy over all considering what i have done to it.
Heres a vid of the nitrous run
http://www.youtube.com/watch?v=Az2ELS9uN0Y
Last edited by fastassls1maro; 10-13-2008 at 04:36 PM. Reason: more info