Rosco

Hi!

Ok first off, I am not so keen on making another one of those threads of "how much am I making"
But there is a reason, my torque converter was sent away to be cracked open and cleaned up however it was lost in transit.
A blessing in disguise as now im getting a better one made up for me, I just need to know a rough idea of what my car is making so he can get it roughly as I need.

Ok, so, How much do you think I am putting down with these mods?
Comp XER281HR cam (232/234 duration at .05 and .595/.598 lift 114 LSA )
Fast 90 Intake,
UMI 90 TB,
LT's,
Fast Fuel Rails,
deleted AIR/AC etc

Car has been tuned on the street with EFILive, but not on a dyno as my 4l60e gave up before I could get there.

Just need a rough figure, I thought maybe close to 400hp/380tq? but my cam is quite big so maybe a little more?
Cheers everyone! got to call him back shortly and let him know, its not a huge deal if its not too close as he will make any changes I need to it for me, its just a PITA getting it out and sending it off!

SMAX

iTrader: (11)

With a 233/239 595/605 comp xer, bbk intake and bbk 85mm tb through an unlocked tci ssf3500 stall and 3.73's I put down 390rwhp and 375rwtq.

Rosco

so possibly close to 450 hp and 430 tq at the crank?

SMAX

iTrader: (11)

That might be a little conservative, but it should be close.

Rosco

I shall add a little more to be on the safe side then, im guessing its better to go for slightly higher as when I get my car tuned it should be even more on the mark.

Thanks SMAX!