Power to the wheels?
#1
Power to the wheels?
Ok, so I started off with a stock 99 SS 6spd. It will be finished and on the dyno come late march. What do you think it will put down, just so I dont expect too much.
Engine/drive mods:
Ls6 intake
Slp lid
Slp headers/y-pipe
Magnaflow CB
Slp 25% underdrive pulley
New plugs/wires
Plus a dyno tune
I am hopeing to be around 330-350hp to the wheels, possible?
Engine/drive mods:
Ls6 intake
Slp lid
Slp headers/y-pipe
Magnaflow CB
Slp 25% underdrive pulley
New plugs/wires
Plus a dyno tune
I am hopeing to be around 330-350hp to the wheels, possible?
Last edited by blknSS; 02-29-2012 at 06:34 AM.
#2
Staging Lane
iTrader: (2)
ha, I have a 99 trans am with similar mods minus the pulley. I think your expectations are within range and I will also be having my car dyno'd end of March. I had a 98 z28 with MAC mids and a weiand intake, but no tune put 326 to the wheels.
My current mods are:
Slp lid
Ls6 intake
MAC headers w/custom y-pipe (carsound cats back to a cutout b4 the axle)
Tuned by a friend in Austin
...it'll be interesting to compare results.
My current mods are:
Slp lid
Ls6 intake
MAC headers w/custom y-pipe (carsound cats back to a cutout b4 the axle)
Tuned by a friend in Austin
...it'll be interesting to compare results.