Anyone
05-07-2012, 01:46 PM
#1
TECH Resident
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Anyone OK so bought a so called 427 g8 of ebay afr 225 heads ! Kook headers 1 7/8 !
Callis this k1 that !
BULLSHIT Dyno at 413 hp 409 trq
Tore motor down and found a ton of **** wrong including that compression was at 7.56
Had a stock crank in it
-11 cc dish pistons
3 broken lifters ?
But old car still ran ok
8.20 89 mph in 1/8th
OK so just finished
Afr 230 v2 heads mamofied along with 102 mamofied intake!
4.030 block with a 4.100 stroke
decked to 00.2 with -11 cc dished weisco piston and k1 6.125 rods
11.6 to 1 compression quench right at .040
Ported 90 mm tb for now
42 lbs inj
kooks 1 7/8 headers
Comp cam 247-251 on a 112
3400 yank stall
Where should she be at for power and 1/8th mile !
__________________
Callis this k1 that !
BULLSHIT Dyno at 413 hp 409 trq
Tore motor down and found a ton of **** wrong including that compression was at 7.56
Had a stock crank in it
-11 cc dish pistons
3 broken lifters ?
But old car still ran ok
8.20 89 mph in 1/8th
OK so just finished
Afr 230 v2 heads mamofied along with 102 mamofied intake!
4.030 block with a 4.100 stroke
decked to 00.2 with -11 cc dished weisco piston and k1 6.125 rods
11.6 to 1 compression quench right at .040
Ported 90 mm tb for now
42 lbs inj
kooks 1 7/8 headers
Comp cam 247-251 on a 112
3400 yank stall
Where should she be at for power and 1/8th mile !
__________________
