Space Coast roll call
#181
boost it
#183
Sorry boss I missed this comment. But yes I was relocated to start work at Embraer. Lots of opportunity here with NGC/Harris/Embraer all going through hiring sprees.
#187
TECH Resident
iTrader: (13)
Looks like a shed (hole in the wall). I have tried 3 machine shops in the local area including Steves, Matts, and Rank. And the results were poor from ALL 3. Visually everything looked fine. But when measured with our QC equipment here at our facility....not to acceptable standards, at least not for our million dollar prototype engines. I checked surface roughness with our specialty machine and neither Matts or Rank could get it in spec. Rank screwed up a $500K prototype engine block trying to deck the surface (we only have 5 of these). Looked great to the naked eye. Put it on our marble slab and measured flatness....no bueno. We now ship everything up to our contact at Roush in Detroit to have machine work done because no one around here has NEW QUALITY equipment that can hold good tolerance.
Last edited by roastin240; 06-22-2016 at 03:02 PM.
#188
10 Second Club
iTrader: (26)
So.....were you seriously asking in a local thread of a car forum for a local machine shop, and then follow it up about million dollar engines and 500k prototypes? Bit different world from a standard rebuild on the ol 346....
Last edited by ddnspider; 06-24-2016 at 07:08 AM.
#189
TECH Fanatic
iTrader: (8)
Looks like a shed (hole in the wall). I have tried 3 machine shops in the local area including Steves, Matts, and Rank. And the results were poor from ALL 3. Visually everything looked fine. But when measured with our QC equipment here at our facility....not to acceptable standards, at least not for our million dollar prototype engines. I checked surface roughness with our specialty machine and neither Matts or Rank could get it in spec. Rank screwed up a $500K prototype engine block trying to deck the surface (we only have 5 of these). Looked great to the naked eye. Put it on our marble slab and measured flatness....no bueno. We now ship everything up to our contact at Roush in Detroit to have machine work done because no one around here has NEW QUALITY equipment that can hold good tolerance.
#191
anyone know of any good apts that are not a bitch to get approved for? maybe if someone has a sub rental (apt or condo).
looking to be no more then $650-700 give or take. from north of eau gallie to viera area. closer to wickam the better.
looking to be no more then $650-700 give or take. from north of eau gallie to viera area. closer to wickam the better.
#196
#197
Staging Lane
iTrader: (1)
Long time no visit on this board -- up top says 1-17-2013! Blackbird, I saw you post on another thread that you couldn't remember my screen name, lol!
I know xxxSilencerxxx, Blackbird and Mike Morris - but would love to meet up sometime. Used to go to "gatherings" all the time when I lived in Maryland -- don't see that too much down here. I think it's because everyone has to work three jobs to make a living down here.
Anyway -- live on Merritt Island, have a store at the mall...now, where's the next meet? Hooters? What about TNT at Bithlo one Wednesday night?
I know xxxSilencerxxx, Blackbird and Mike Morris - but would love to meet up sometime. Used to go to "gatherings" all the time when I lived in Maryland -- don't see that too much down here. I think it's because everyone has to work three jobs to make a living down here.
Anyway -- live on Merritt Island, have a store at the mall...now, where's the next meet? Hooters? What about TNT at Bithlo one Wednesday night?
#198
TECH Resident
iTrader: (4)
Join Date: Feb 2007
Location: Manassas, VA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Long time no visit on this board -- up top says 1-17-2013! Blackbird, I saw you post on another thread that you couldn't remember my screen name, lol!
I know xxxSilencerxxx, Blackbird and Mike Morris - but would love to meet up sometime. Used to go to "gatherings" all the time when I lived in Maryland -- don't see that too much down here. I think it's because everyone has to work three jobs to make a living down here.
Anyway -- live on Merritt Island, have a store at the mall...now, where's the next meet? Hooters? What about TNT at Bithlo one Wednesday night?
I know xxxSilencerxxx, Blackbird and Mike Morris - but would love to meet up sometime. Used to go to "gatherings" all the time when I lived in Maryland -- don't see that too much down here. I think it's because everyone has to work three jobs to make a living down here.
Anyway -- live on Merritt Island, have a store at the mall...now, where's the next meet? Hooters? What about TNT at Bithlo one Wednesday night?
#199
Launching!
iTrader: (2)
Join Date: Oct 2005
Location: FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Long time no visit on this board -- up top says 1-17-2013! Blackbird, I saw you post on another thread that you couldn't remember my screen name, lol!
I know xxxSilencerxxx, Blackbird and Mike Morris - but would love to meet up sometime. Used to go to "gatherings" all the time when I lived in Maryland -- don't see that too much down here. I think it's because everyone has to work three jobs to make a living down here.
Anyway -- live on Merritt Island, have a store at the mall...now, where's the next meet? Hooters? What about TNT at Bithlo one Wednesday night?
I know xxxSilencerxxx, Blackbird and Mike Morris - but would love to meet up sometime. Used to go to "gatherings" all the time when I lived in Maryland -- don't see that too much down here. I think it's because everyone has to work three jobs to make a living down here.
Anyway -- live on Merritt Island, have a store at the mall...now, where's the next meet? Hooters? What about TNT at Bithlo one Wednesday night?