Blow off valve on a Procharger ?
#1
Blow off valve on a Procharger ?
So I had a company install a F1a kit and they ditched the stock bypass valve and put on a big Tial BoV cause they had it laying around and didnt cost me nothing really... Does the BoV act the same as the big red procharger one or am I losing boost putting a BoV on a Procharger thanx for the help guys
#2
TECH Enthusiast
iTrader: (12)
. yes you can run a bov on a SC, many guys here have one but I use a bypass instead. bypass valves are open during idle. Do a search its been talked about a lot, you'll find the pro's and con's.
a BOV could put excessive pressure on your impeller
a BOV could put excessive pressure on your impeller
Last edited by SELLSZ06; 05-19-2009 at 09:21 PM.
#4
TECH Resident
iTrader: (36)
Join Date: Dec 2006
Location: Lafayette, CA
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
Rick
#5
TECH Resident
iTrader: (1)
Join Date: Jan 2002
Location: ATX©
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
As long as it has the proper srping for your Engine Vacuum signal, youll be fine.
As with Tial/Turbosmart, the springs can be replaced to have them open at idle for a supercharger to have a nice clean MAF signal along with longevity of the impeller.
-Wade
As with Tial/Turbosmart, the springs can be replaced to have them open at idle for a supercharger to have a nice clean MAF signal along with longevity of the impeller.
-Wade