Looking into forced induction!!
#1
TECH Regular
Thread Starter
iTrader: (10)
Join Date: Nov 2001
Location: Florida
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Looking into forced induction!!
Current set up in sig.
I would like to install a front mount/truck header set up.
What would be a recommended turbo for my current engine combo?
I figure the first thing to nail down would be the turbo, and then build the rest around it.
This is 99.9% Strip car. Want to run in the real street 5.90 class.
Thanks,
Rick
I would like to install a front mount/truck header set up.
What would be a recommended turbo for my current engine combo?
I figure the first thing to nail down would be the turbo, and then build the rest around it.
This is 99.9% Strip car. Want to run in the real street 5.90 class.
Thanks,
Rick
#2
11 Second Club
iTrader: (20)
Join Date: Oct 2004
Location: colorado springs colorado
Posts: 270
Likes: 0
Received 6 Likes
on
3 Posts
personally id go with a big t-4 turbo like a gt 45 type deal. im sure dr. turbo will have good advice. but just a good n20 kit may get you were ya need to go.
main reason i posted is to say buy your turbo off supra forums i got my turbo there for cheap. perfect condition
main reason i posted is to say buy your turbo off supra forums i got my turbo there for cheap. perfect condition
#4
TECH Resident
iTrader: (1)
Join Date: Jan 2002
Location: ATX©
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
T6 76mm is True Street trim, T4 is too small for what you want to do. Especially with your engine combination.
Go T6, no doubt about it. In fact, you could do a T6 76mm with one downpipe, and a second turbo such as a Precision 91 and a different downpipe for all out.
That would be sick.
Go T6, no doubt about it. In fact, you could do a T6 76mm with one downpipe, and a second turbo such as a Precision 91 and a different downpipe for all out.
That would be sick.