D1SC need valve springs???
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Nov 2008
Location: Sophia, NC
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
D1SC need valve springs???
I am about to install a D1SC on my 98 WS6. The guy i got the kit from said he highly recommended replacing the factory valve springs because the stock ones will allow the valves to float. I know the stock springs are pretty weak, but what would be my best bet for new springs to go with?? I know the Patriot Xtreme dual spring kit is probably the most affordable, but would i be better off with another spring setup including retainers, seals, locks, locators...
Any direction would be very helpful
Matt
Any direction would be very helpful
Matt
#4
LS1Tech Sponsor
iTrader: (16)
Many years ago I ran my D-1SC on my 110,000 mile engine at 7 psi with stock springs, for several years without any problems. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website