2XR95Z28

iTrader: (4)

So i have a conversion standalone harness that is wired for a 5 wire MAF, and now since i'm going to be going speed density i need a connector that adapts from the 5 wire MAF to the 3 wire MAF and the IAT sensor connectors. I obvioulsy won't be using the MAF connector but do need to run and IAT sensor.

Also where is the best place to get an IAT sensor?

Can anyone help me out here?

Thanks in advance!

6.0ltrS10

iTrader: (2)

Ebay, item number 260391345595 I'm not sure if this is what you need but they also have the harness to work the other way.

2XR95Z28

iTrader: (4)

Looking at this adapter, this would work correct?

http://cgi.ebay.com/ebaymotors/ws/eB...0685&viewitem=

ss.slp.ls1

iTrader: (36)

Why not just cut off the 5pin MAF pigtail and pick up a IAT pigtail. You could pin it in 1 minute, tuck in the unused wires into the loom, and it would look much cleaner than using the adapter, and you'd save money to boot.

ss.slp.ls1

iTrader: (36)

Actually, no, that is backwards to what you need.

Just pick up this and do what I posted above. CE part #: 108053

http://www.casperselectronics.com/st...17&search.y=12