SCott5

iTrader: (40)

I am curious if anyone on here has put a procharger in their lsx powered mustang whether it be a fox or sn95 or new edge considering the engine bay is basically the same for all those years. I have been talking to Bob from brutespeed about a set up that may work. I am doing some more research and was seeing if anyone has done this already.

Thanks

Bob@BruteSpeed

iTrader: (16)

https://ls1tech.com/forums/conversio...d-mustang.html

Here is a '93 where he used an F Body kit on it. I'll look for more. Bob

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/ATI-1LS10...1LS100-F1I.htm
Link to this kit.



I know you wanted to put the blower up top, you might check to see if the transplant kit will work. Bob

goinfast

What about a kit for the gm trucks

Bob@BruteSpeed

iTrader: (16)

That might work too, but I personally would prefer to use a kit that has an 8 to 12 rib wide belt. Bob

SCott5

iTrader: (40)

I like the transplant kit. I am going to def have to do some measuring. Could a truck kit even be used with a blower the size I wanna use and swapped to a 12 rib?

Bob@BruteSpeed

iTrader: (16)

Not easily, as it is not something that ProCharger offers. You would be better offer with the 8 rib Corvette bracket that I sent you the links to if you went that direction. I think the Transplant kit might be the best way to go if you have room for it. Bob