PCV Z06 Catch Vent $10!
#1
PCV Z06 Catch Vent $10!
Used a Puralator large PCV filter and housing, some hose, and tie straps.
I ran both my PCV lines to the filter housing opening to the side of the filter media and tied them to the housing with one hole each and tie straps. I then tie strapped it on the bottom front frame member and took the original hose line connection in the filter housing with a third hose back to the side and tie strapped it, for overflow. I can view and clean it from the engine bay and the gunk will go out the overflow line back. The smell everyone speaks of with a vented system will be blowing under me.
I ran both my PCV lines to the filter housing opening to the side of the filter media and tied them to the housing with one hole each and tie straps. I then tie strapped it on the bottom front frame member and took the original hose line connection in the filter housing with a third hose back to the side and tie strapped it, for overflow. I can view and clean it from the engine bay and the gunk will go out the overflow line back. The smell everyone speaks of with a vented system will be blowing under me.
Last edited by rosulekg; 08-31-2006 at 12:40 PM.