Looking for the magic 500RWHP w/Vortech.
10-02-2006, 02:24 PM
#1
12 Second Club
Thread Starter
iTrader: (27)
Join Date: Feb 2006
Location: Texas....thank God.
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Looking for the magic 500RWHP w/Vortech. So, I have a VORTECH aftercooled system sitting on the shelf in my garage. The longer it sits there, the more my mind wanders and thinks: "hmmm....what if(_____)?" 
Resultently, here I am now! What would you supercharged guys recommend to send my setup over the 500RWHP mark? This is going to be a winter project and I have plenty of time to buy things and install. I just want to get the most out of FI without having to go into the engine.
I figure i might as well take full advantage of the long winter and do it right the first time.
Any help would be appreciated!
Resultently, here I am now! What would you supercharged guys recommend to send my setup over the 500RWHP mark? This is going to be a winter project and I have plenty of time to buy things and install. I just want to get the most out of FI without having to go into the engine.
I figure i might as well take full advantage of the long winter and do it right the first time.
Any help would be appreciated!
10-02-2006, 02:29 PM
#2
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
i dont recommend pushing it on a stock block but if you insist, just put a 2.75 pulley and run about 10-11 lbs. make sure you have a decent fuel system and get some better valvesprings.
if you haven't polished the kit now would be a good time to do so.
if you haven't polished the kit now would be a good time to do so.
BOSS APPROVED!
