Ok, So im starting my Custom turbo kit.
#1
Has Unresolved Sales In Feedback/12 second club
Thread Starter
iTrader: (3)
Join Date: Sep 2006
Location: Just outside of Springfiled Missouri.
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Ok, So im starting my Custom turbo kit.
List of parts so far. Add anything that you think is necessary.
1. Ls1 Header Flanges
2. 5.0 Shorty 1 5/8" Headers
3. 76mm + Turbo
4. 50 MM Waste Gate
5. 50 MM BOV
6. 40# + Injectors
7. Walborrow 255lph Pump
8. Intercooler
9. Hot Side Piping
10. Cold Side Piping
11. O2 Bungs
12. Rubber Collectors
13. Manual Boost Controler
14. Adjustable Fuel Press. Regulator
15. Boost Gage
16. Wideband O2
I will post picts as the project starts. right now im just getting everything that i will need.
1. Ls1 Header Flanges
2. 5.0 Shorty 1 5/8" Headers
3. 76mm + Turbo
4. 50 MM Waste Gate
5. 50 MM BOV
6. 40# + Injectors
7. Walborrow 255lph Pump
8. Intercooler
9. Hot Side Piping
10. Cold Side Piping
11. O2 Bungs
12. Rubber Collectors
13. Manual Boost Controler
14. Adjustable Fuel Press. Regulator
15. Boost Gage
16. Wideband O2
I will post picts as the project starts. right now im just getting everything that i will need.
Last edited by notatruews6; 12-02-2006 at 01:57 PM.
#3
Has Unresolved Sales In Feedback/12 second club
Thread Starter
iTrader: (3)
Join Date: Sep 2006
Location: Just outside of Springfiled Missouri.
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
The headers fit in almost exactly the same place as the truck manis, but the hug the block closer, the drivers side header, actually fits if you cut about 1 1/2 off of the primarys at the flanges, they are about flush with the crankshaft pully...