30lb SVO injector enough for...
#1
12 Second Club
Thread Starter
Join Date: Jan 2004
Location: Dayton, Ohio
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
30lb SVO injector enough for...
A 99 LS1 with a large cam and Patriot heads? Cam is an England Green Whiplash, plus all the supporting mods and the tranny is manual. Current dyno results are 402/372 and of course I am pushing the stock injectors way beyond 100% duty cycle.
I am about to install the heads this week, so the 402 number is with stock heads... Will the SVO injectors be enough? I read that the SVO 30' should flow 36LBS with the LS1 fuel pressure.
I am also considering Bosch flow matched 32's from a forum vendor.
I am about to install the heads this week, so the 402 number is with stock heads... Will the SVO injectors be enough? I read that the SVO 30' should flow 36LBS with the LS1 fuel pressure.
I am also considering Bosch flow matched 32's from a forum vendor.
#2
11 Second Club
iTrader: (32)
Join Date: Jan 2006
Location: Southaven, MS (near Memphis, TN)
Posts: 3,701
Likes: 0
Received 2 Likes
on
2 Posts
I'm running 30# SVO injectors with a 125rwhp dry nitrous kit and right at 79%... Not sure of the full power on my car, but I'm willing to bet it's over 400rwhp.
They'll be good to go!
They'll be good to go!
#4
A 99 LS1 with a large cam and Patriot heads? Cam is an England Green Whiplash, plus all the supporting mods and the tranny is manual. Current dyno results are 402/372 and of course I am pushing the stock injectors way beyond 100% duty cycle.
I am about to install the heads this week, so the 402 number is with stock heads... Will the SVO injectors be enough? I read that the SVO 30' should flow 36LBS with the LS1 fuel pressure.
I am also considering Bosch flow matched 32's from a forum vendor.
I am about to install the heads this week, so the 402 number is with stock heads... Will the SVO injectors be enough? I read that the SVO 30' should flow 36LBS with the LS1 fuel pressure.
I am also considering Bosch flow matched 32's from a forum vendor.