Racetronix

iTrader: (2)

Limited time special on all Siemens (Continental) 63 and 80 lb/hr DEKA 4 fuel injectors:

Singles $44.99 each or $399.92/8
1% Lab flow-matched sets $399.00

Simply use coupon code LSX-PROMO when checking out to activate the sale pricing.

Free LS2/LS3/LS7 lower o-rings can be added as well.

63# Minitimer/
Jetronic/EV1/LS1/LT1/TPI



63# USCAR/
EV6/LS2*
(requires raised fuel rails and free larger lower o-rings)



63# Stubby
Minitimer/
Jetronic/EV1/LS3/7*
(*requires IA-UM adapters and free larger lower o-rings)



80# Minitimer/
Jetronic/EV1/LS1/LT1/TPI



80# USCAR/
EV6/LS2/LS3/7
(requires raised fuel rails and free larger lower o-rings)



LS2/LS3/LS7 Lower Viton O-rings


USCAR to Minitimer Wiring Adapters

Racetronix

iTrader: (2)

Ttt .......

Speartech

iTrader: (14)

Is the 63# Stubby the same length (O-ring to O-ring) the LS9 injector (pictured)?





Thanks,

Racetronix

iTrader: (2)

Yes, they are. Don't forget to add the free lower Viton o-rings to your order as well as the IA-UM wiring adapters.

Thanks.

trey04gto

iTrader: (4)

Are the 80# minitimer's the same as the 80lb FRPP injectors??
These are 80#'s rated at 43.5 psi right? just with the ability to drop right in to an LS1.
ie LS fuel pressure makes them close to 90#'s?

Racetronix

iTrader: (2)

Yes, the FI114991 (FMS 80#) and FI114992 (LS1 connector) are the same injector apart from the connector. With gas they flow apx. 95.6 lb/hr @ 58 PSI.