When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i'm running twin Walbros on my 98 WS6 and would like to run a -10 braided line from the tank to the rails. just curious what length to get? who here has run one on their car?
I'm not running braided, but push-loc, and 20ft was plenty to run along the original fuel line routing. And made a front cross over(twice lol). With about 3 feet left.
-10 is overkill. Harder to route, more expensive & not worthwhile until you are over the 1200hp range.
Unless you are feeding it with much more than 2 pumps, -8 is fine.
Recently did 1100rwhp on a -8 with stable pressure.
-8 sounds like a better decision huh? i was thinking doing -10 once and not having to worry about restriction later. i'm building a front mount MPT76 right now and looking at about 650 hp. going with a PT88 later or twin MPT76s