stock truck fuel rail MAX hp?
#1
On The Tree
Thread Starter
Join Date: Jun 2009
Location: Pawtucket, RI
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
stock truck fuel rail MAX hp?
hey guys im running an aeromotive a1000 pump, boost referenced regulator,and 60# siemen injectors, im lookin at around 700 hp wit the turbo whats the stock truck rail good until? should i upgrade if so who makes a good rail for the truck intake?? thanks in advance
#2
11 Second Club
iTrader: (1)
Join Date: Sep 2008
Location: SoCal
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
That a1000 isn't going to keep up if you're running high base pressure. Got a built 331 stang in the shop that we put a gt4788 on 35 psi base pressure 13 psi of boost made 650 on our mustang dyno and was out of pump. Fuel pressure was all over the place at the higher levels. Customer bought a Weldon pump. The car went on to make 750ish on pump gas and 1024 on c16.
I'd upgrade pump if it's possible
I'd upgrade pump if it's possible
#5
aeromotive specs their a1000 at 600lbs/hr at 45PSI, capable of 1000 crank HP.
Next step up is a magnafuel 4301 or 4101
speed inc makes a rail kit that should work, give em a call
Next step up is a magnafuel 4301 or 4101
speed inc makes a rail kit that should work, give em a call