Injector size OK???
#1
Injector size OK???
Ok I'm not sure if my LS2 (33lb) injectors are enough for my setup anymore, I would like to stick with LS2 style injectors so I done have to buy adapters ETC. Any help with letting me know what injectors are good let me know. So I need your guys .02
My specs on the motor are as follow:
Iron block 5.3, Bored to LS1 specs and LS1 rotating assembly
TSP Torquer V2 CAM
FAST 102mm intake
LS6 heads, ported on exhaust side
Im not sure If they will suffice, although I think I will be fine. Let me know what you guys think. Thank you, John
My specs on the motor are as follow:
Iron block 5.3, Bored to LS1 specs and LS1 rotating assembly
TSP Torquer V2 CAM
FAST 102mm intake
LS6 heads, ported on exhaust side
Im not sure If they will suffice, although I think I will be fine. Let me know what you guys think. Thank you, John
Last edited by parks450; 01-21-2012 at 06:14 PM.
#4
FormerVendor
iTrader: (30)
Join Date: Sep 2008
Location: Cumming, Ga
Posts: 1,274
Likes: 0
Received 0 Likes
on
0 Posts
Ok I'm not sure if my LS2 (33lb) injectors are enough for my setup anymore, I would like to stick with LS2 style injectors so I done have to buy adapters ETC. Any help with letting me know what injectors are good let me know. So I need your guys .02
My specs on the motor are as follow:
Iron block 5.3, Bored to LS1 specs and LS1 rotating assembly
TSP Torquer V2 CAM
FAST 102mm intake
LS6 heads, ported on exhaust side
Im not sure If they will suffice, although I think I will be fine. Let me know what you guys think. Thank you, John
My specs on the motor are as follow:
Iron block 5.3, Bored to LS1 specs and LS1 rotating assembly
TSP Torquer V2 CAM
FAST 102mm intake
LS6 heads, ported on exhaust side
Im not sure If they will suffice, although I think I will be fine. Let me know what you guys think. Thank you, John